Fluid oozing from clutch master cover

So I replaced the brake fluid in the clutch master cylinder, vacuum bled the outboard fitting under the seat and refilled it.
Now I see a bit of fluid oozing from the lid. There appear to be two slots in the lid to act as vents, its coming from there.
I pulled the level lower a couple of times and now I get a bit of moisture around the two vents. I guess the answer to my question is probably pull the level down to where it shows in the window.
What do you say?  Anyone else had this happen?

Looks like you've overfilled it.





.

Will drop it down to the sight glass and see if that works

Beetle, Speaking of Masters, does your Brembo clutch master struggle to fully disengage the clutch when the bike is hot ? Mine gets extra hard to shift into neutral after a good run.

Mine did that with the stock master cylinder. Does it with the Brembo. I figured it was me.




.