Help with Paint code please.

Well, it finally happened. After ten years of ownership, I've managed to damage my GRiSO. A moments inattention, a loose road surface combined with a grabbed front brake has resulted in minor damage which I want to repair.
My bike is an '06 1100 in Red. Id love to know the paint code if anyone can help.
Also damaged were the switches on the left bar, specifically the tiny one that controls the trip computer.
Id this available as a separate item, or would I have to replace the whole switch block?

I'm feeling very sheepish this morning, a bit battered and bruised. I've already apologised to my bike for damaging her!!

I'm pretty sure you can buy the switch block on the Bay of Fleas for not a lot. It'll probably need a bit of detective work with a multimeter to realign the cabling to the plug but it'll be a lot cheaper and easier than buying an OE item.

There are some paint companies specialised in motorbikes. like this one that can probably help you if you cannot find the code.

These guys based in the UK might be worth a try. I have sent enquiries in the past and have been super helpful: [You must be registered and logged in to see this link.]

Guzzi Two Shoes wrote:

Also damaged were the switches on the left bar, specifically the tiny one that controls the trip computer.
Id this available as a separate item, or would I have to replace the whole switch block?

When i bought mine the left hand switch block had alread been replaced with another Guzzi one without the computer control switch. The wires to that switch had been run to a micro-switch held to the bars with insulating tape

I ran the wires to the one of these switches (push to return = Option A) Amazon single use switch

It was waterproof - quite easy yto use and fine for the whole time i had it - ask @Tinker

Also then you can buy a 2 position version of the same switch to control spotlights on the other bar