Original or aftermarket Brake Pads?

Thanks, about to order a set. These I presume are the correct ones?:

[You must be registered and logged in to see this link.]

Never EBC HH pads. They squeal a lot and don't brake so well. Try SBS 900RS. I had them on my 16 Tuono. Planning to get them for GRiSO

I Like the EBC HH pads - they have never squealed for me in over 100,000 km

Likewise. They are the 'Go To' for customers' bikes.

After riding with the EBC HH pads for nearly 5 years now, going to replace them this spring for different ones. While I do like the stopping power of these pads under dry conditions, the initial bit is a bit too strong for my taste. Last month I made a slight error braking a little too hard at low speed, front wheel locked and I was on the pavement before I could think 'woops'...
Also not impressed with performance when wet.

Any suggestions for a pad that brakes well but has a slightly less aggressive bite than the EBC HH sintered pads?

I was using HH pads but at 40,000miles i had to replace the discs to pass MOT
I had no problems with the HH - good brakes, but I have changed to FA244 Organic as they (apparently) cause less wear

I hate to sound so stupid and insensitive but as a road rider using 50-90mph mostly and with a pillion 20% of the time - i have noticed little or no change in brake feel with these pads under any conditions of road or weather.

Does anyone have experience with the Brembo SA pads compared to the EBC HH pads? How do they differ? More bite, less bite?