spoked rims on a '08 GRiSO

Montanarolo Posts : 17 Join date : 2019-09-29

Good night,

I would like to change the GRiSO rims to GRiSO '16 spoked rims.

I would have loved to buy some accessories but 3000+ euros is really too much....

So I found a front wheel from a '16 GRiSO, spoked rim, so I am sure it fits.

But I do not find the rear one, I found a stelvio spoked rim, could it be the same ? I am sure that the front wheel is not the same for sure, but the rear one seems to be very similar.

Do you have any idea on it ?

Thanks a lot for your answers :-)

Jerome

GRiSO Capo Posts : 735 Join date : 2014-04-23 Age : 77

It is the same size for a non-NTX Stelvio.

But the part numbers are different, #884164 for the GRiSO, #883433 for the Stelvio. Both are tubeless.

If you are just changing the rim it should be OK, but don't blame me if I'm wrong!

GRiSO Capo Posts : 10711 Join date : 2013-05-29 Age : 67

The rear rim off an early 'Small tank' Stelvio, (2009-2011) will fit and the rim width is the same. Later 'Big Tank' models have a narrower rear rim. Other than that the difference will be the colour of the rims.

Be aware that as well as the front wheel you will need the front wheel spindle and spacer as the hub dimensions of the wire and cast wheels are different.

Montanarolo Posts : 17 Join date : 2019-09-29

As this one is a 2010 but NTX, it does not fit ?

[You must be registered and logged in to see this link.]

Thanks to you Pete I just bought the front wheel spindle !

Thought like the forks are the same, the wheel spindle is the same ! Embarassed

GRiSO Capo Posts : 10711 Join date : 2013-05-29 Age : 67

I have a pair of spoke wheels if you want? Your cost to ship, which wouldn't be cheap, would be high but they're yours for $1,000 AU which might be competitive, dunno?

Pete

Montanarolo Posts : 17 Join date : 2019-09-29

Thanks Pete but I have bought yet the front one.

I should have told you before that would have been better for sure !

[You must be registered and logged in to see this link.]

Could you confirm me that the rear wheel in the link I shared could be the good one ?

Don Abbondio Posts : 102 Join date : 2017-07-12 Age : 60

Hi Pete would the spoked rims you have fit a 2007 1200 sport

Montanarolo Posts : 17 Join date : 2019-09-29

Only Carc for the rear I believe so would be ok.

The main problem is the different forks, must measure your hub :-)

GRiSO Capo Posts : 10711 Join date : 2013-05-29 Age : 67

alanlemansiv wrote:: Hi Pete would the spoked rims you have fit a 2007 1200 sport

Spindle size is the same I believe, not sure about disc offset and it would probably need a different spacer at the front. Rear is a bolt-on.

Montanarolo Posts : 17 Join date : 2019-09-29

@Pete : I bought the one I linked before. The wheel is from a 2010 Stelvio NTX, and the part number written on the hub is the same as a 1200 SE. (978014)

[You must be registered and logged in to see this link.]

Don Abbondio Posts : 102 Join date : 2017-07-12 Age : 60

Hi Pete the spoked wheels you have what guzzi where they originally from

GRiSO Capo Posts : 10711 Join date : 2013-05-29 Age : 67

They're off a GRiSO. I've also got a Stelvio front and a Cali 1400 rear if anyone is looking for them.

Squinternotto Posts : 5 Join date : 2021-04-05 Age : 60

Halloo Pete.. pm sent to you

GRiSO Capo Posts : 10711 Join date : 2013-05-29 Age : 67

It'd be spendy to send them to you....

» Strength of the rims?
» How to clean spoked wheels
» Spoked wheels conversion
» Tire pressure gauge for spoked wheels
» GRiSO HEAD's Introduction and GRiSO modifications