Guess this is an Old Map?

My Guzzidiag cables arrived, connected to bike and read the map, map software number is 2230G803 which i guess is an old map?
Bike is stock at the moment, have the street legal ZARD arriving in a couple of weeks. Until then is there a newer map i can run? And where can i find maps for these bikes?
The bike is a Late 2011 SE?
Regards J

Beetle is your man.

He's got an excellent map for the stock exhaust until you've got the Zard installed. The Zard map is in development (although very close so perfectly fine). Does your Zard have a catcon? I assume yes since you're in the UK? The map is being developed for the non-cat version. Mark, any guess as to the difference?

Hi Tocino,
Yes the Zard has the Cat. I will see if Beetle has anything for me when the Zard arrives and I have fitted it. I performed a TPS reset and reset the settings on the ecu via the Guzzidiag software and took the bike for a 60 mile spin. Throttle response seemed loads smoother and there was no more back firing. The bike had a GPR exhaust fitted when i picked it up. After changing the exhaust back to stock there was a bit of a stumble in slow traffic around 20 mph with light throttle and backfiring occasionlay. The reset seems to of sorted these problems, so I may as well stick with the 2230G803 map which has probably been in the bike since the bike was new.
Thank's to everyone for all the information on this forum

The -03 map is the last factory iteration. It's fairly pedestrian. Dunno if there is a Zard with cat-con map? I'll have a look when I'm near my PC of Mark doesn't chime in first.

Pete

Yes, there's a Zard-with-catcon map. It's a roller map.